Remote Start System for 2013-2018 RAM 1500
Push-to-Start Automatic
* * * * * * * * *
-----
** THE VEHICLE LISTED REQUIRES KLON PROGRAMMING FOR THIS UNIT TO
WORK! **
-----
You will need the ADS-USB Cable in order to complete the KLON
programming processes which can be purchased here:
HOW THE KLON PROCESS WORKS:1. We will pre-programmed your unit to your vehicle.
2. During the installation process (as per your installation
guide) you will have to connect the unit to your PC via the
ADS-USB Cable.
3. Once connected you will visit idatalink.com using the Internet
Explorer browser.
4. You create a free account.
5. You will be prompted to install a small extension.
6. Once you install the extension and refresh the page, the website will detect your unit and may ask you for your vehicle information to complete the programming process and install the correct firmware on to your unit.
*****************************************************************
Remote Start System for 2013-2018 RAM 1500 Push-to-Start
Automatic
*****************************************************************
Remote Start System for 2013-2018 RAM 1500
Push-to-Start Automatic
Remote start solution for Chrysler Tipstart and PTS models 2011
and up. Includes plug & play t-harness. Features 3XLOCK
remote start from factory transmitter. Can be paired with optional range extender kits sold separately. *** Replaces
FLRSCH7.
PLEASE NOTE:THIS UNIT MUST BE PROGRAMMED (FLASHED) IN ORDER TO FUNCTION WITHYOUR SPECIFIC VEHICLE.
Please contact us if you would like us to provide you with the appropriate INSTALLATION GUIDE.
We can eliminate the hassle of programming your remote start, as we provide free flashing after the purchase of each unit! To save yourself the trouble, please contact us by sending us the following vehicle specifics to our email.
FOR EXAMPLEVehicle Year: 2014
Vehicle Make: Honda
Vehicle Model: Civic
Engine Type: 4 Cylinder / 6 Cylinder / 8 Cylinder
Ignition Type: Push-to-Start / Standard Key Start
Key Fob: Factory / Aftermarket
PLEASE NOTE that SOME vehicles require a mandatory KLON flashing
in order for it to operate with this remote start. Part of the in order for it to operate with this remote stat will require not only the remote start, but your vehicle and key fob, which we do not have access to. You will be responsible for completing this step.
An ADS-USB Weblink Updater Flash Loader USB Cable will be required for vehicles that require KLON. We will notify you via email if your vehicle falls within this category.
HOW THE KLON PROCESS WORKS:1. We already pre-programmed your unit to your vehicle.
2. During the installation process (as per your installation
guide) you will have to connect the unit to your PC via the ADS-USB Cable (sold separately).
3. Once connected you will visit idatalink.com using the Internet
Explorer browser.
4. You create a free account.
5. You will be prompted to install a small extension.
6. Once you install the extension and refresh the page, the website will detect your unit and may ask you for your vehicle information to complete the programming process and install the correct firmware on to your unit.
PLEASE ALSO NOTE that SOME vehicles require an RF KIT.