🔥 Rough Country RC703 Body Lift Bumper Brackets Front & Rear Brackets for 3-Inch Lift – Chevy C1500 / K1500 (1988–1994)
If you’ve installed a 3-inch body lift kit and need proper bumper alignment, this system delivers the correction you need. The Rough Country RC703 Body Lift Bumper Brackets are engineered specifically for 1988–1994 Chevy C1500 and K1500 trucks.
These brackets are designed to realign front and rear bumpers after installing a 3-inch body lift. They restore factory positioning and maintain proper visual balance.
This setup is not a full Lift Kit. It is a bracket solution designed to complement a 3-inch body lift configuration.
🚙 Confirmed Vehicle Compatibility
Designed specifically for:
-
Chevrolet C1500 (1988–1994)
-
Chevrolet K1500 (1988–1994)
-
2WD and 4WD models
-
Trucks equipped with a 3-inch body lift
Not compatible with:
-
2500 or 3500 models
-
1995 and newer body styles
-
Stock-height trucks without a body lift
Always verify your lift height before ordering. These brackets are engineered exclusively for trucks running a 3-inch body lift setup.
🆚 Why Bumper Brackets Matter After a Body Lift
When a body lift is installed, the body rises above the frame. The bumpers, however, remain mounted to the frame. This creates visible gaps between the bumper and body.
The RC703 brackets correct this misalignment. They reposition the front and rear bumpers upward to match the lifted body height.
Without proper relocation brackets, the truck can appear unfinished. Gaps can affect aesthetics and potentially expose frame components.
These brackets complete the look of your 3-inch Lift Kit installation.
💪 Key Features and Benefits
The RC703 system is engineered for strength and alignment precision.
Key features include:
-
Front and rear bumper relocation brackets
-
Heavy-duty steel construction
-
Designed for 3-inch body lift configurations
-
Bolt-on installation
-
Maintains proper bumper-to-body alignment
The brackets are built to handle daily driving and light off-road conditions. They restore a factory-like bumper position after installing a body lift system.
🎯 Designed to Complement Your Lift Kit
If you have installed a 3-inch body Lift Kit on your C1500 or K1500, bumper alignment becomes necessary. These brackets ensure that your bumper sits correctly relative to the lifted body.
They do not increase ride height. They do not change suspension geometry. They strictly restore alignment following a body lift installation.
This makes them a critical finishing component for lifted OBS Chevy trucks.
🛠 Installation Overview
Professional installation is recommended for best results. The process involves removing the factory bumper mounting hardware and installing the relocation brackets between the frame and bumper.
The brackets reposition the bumpers to align with the raised body. No welding is required. No cutting of the frame is necessary.
Proper torque specifications must be followed during installation. A final alignment check ensures symmetrical bumper placement.
Installation is straightforward for experienced technicians familiar with body lift setups.
🔩 Durability and Construction
The RC703 brackets are constructed from heavy-duty steel. They are engineered to support factory bumper weight without flexing.
The design resists bending and maintains structural integrity under normal driving conditions. Corrosion-resistant finishes help protect against environmental exposure.
These brackets are built to match the durability expectations of a properly installed Lift Kit system.
🌄 Completing the Lifted Look
A lifted truck should look clean and balanced. Misaligned bumpers can disrupt that visual impact.
By properly repositioning the front and rear bumpers, these brackets restore factory body lines. They eliminate unsightly frame gaps caused by body lift installations.
If you are building a classic OBS Chevy truck, finishing details matter. These brackets ensure your 3-inch Lift Kit installation looks complete.
🚀 Why Choose the RC703 Configuration?
This configuration is ideal for owners who:
-
Have installed a 3-inch body lift
-
Want proper bumper alignment
-
Prefer bolt-on solutions
-
Want a clean, factory-like finish
It is engineered specifically for 1988–1994 Chevy C1500 and K1500 trucks.
The RC703 system ensures your Lift Kit installation looks intentional and professionally finished.
🔗 Explore More Suspension Options
Looking for additional suspension upgrades?
Lift kits collection
Protect your upgraded truck with professional window services.
Car window tinting
📞 Need Expert Assistance?
Have questions about compatibility or installation? Contact Audio Jam at (302) 832-2868. Our team can help confirm proper fitment before purchase.
❓ Frequently Asked Questions
1. Do these brackets include a Lift Kits?
No. These brackets are designed to work with an existing 3-inch body Lift Kits.
2. Will these brackets change ride height?
No. They only reposition the bumpers after a body lift installation.
3. Are these brackets required for a 3-inch Lift Kits?
Yes. For proper bumper alignment, relocation brackets are necessary after installing a 3-inch body Lift Kits.
