CALL US TODAY AT (302) 832-2868
Customer Service 091 234-ELLA
Free standard shipping on most* orders!
AudioControl ACX-600.1 Mono powersports/marine amplifier — 600 watts RMS x 1 at 2 ohms— 50 watts RMS + Stinger JKUAMPBRKTD AMP Bracket for mounting AMP Under Driver side seat Compatible with 2007-2018 Wrangler JK +T-Spec V10-AK4 4-gauge amplifier wiring kit — includes power wiring and 2-channel patch cable
AudioControl ACX-600.1
Mono powersports/marine amplifier — 600 watts RMS x 1 at 2 ohms
Bass power survival
What's the point in installing an amp on your ATV if the amp won't survive when you spray off your vehicle after a day of fun in the dirt and mud? AudioControl's ACX-600.1 mono subwoofer amplifier carries an IPX6 waterproof rating, which means a powerful water jet spray won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections.
Play your bass loud and clear
The ACX-600.1 can send up to 600 watts RMS to your sub — plenty enough to feel the bass pound clearly over the sounds of wind and motor. AudioControl's AccuBASS® processing plus low-pass and subsonic filters help you achieve the best bass tone possible for your subwoofer. This compact amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system.
Some practical features
To simplify setup, a "Maximized" LED indicates when you've set the amplifier's gain for optimum performance. An optional wired remote lets you control the bass volume from the driver's seat.
Product highlights:
mono powersports/marine amplifier
350 watts RMS x 1 at 4 ohms
600 watts RMS x 1 at 2 ohms
full-range Class D amp technology
frequency response: 26-20,000 Hz
selectable low-pass filter (80 or 120 Hz, 12 dB/octave)
AccuBASS® processing improves bass performance
optional ACR-1 wired remote available
More Info:
IPX6 rated chassis will withstand power washing
fully sealed input, output, and power connections
preamp and speaker-level inputs
speaker-level inputs handle up to 12v Rms (about 36 watts)
GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input
wiring, fuse, and hardware not included with amplifier
4-gauge power and ground leads and a 60A fuse recommended
dimensions: 10-1/8"W x 2-7/16"H x 5-3/8"D
warranty: 5 years
What's in the box:
Mono amplifier (attached 12" power/ground/input/output harnesses)
7" Power & ground harness
7" Speaker output harness
16.5' ACR-1 Remote Level Control cable w/ an RJ-14 plug on one end and a male 3.5mm plug on other end (ACR-1 Remote Level Control not included)
Power & ground connector (empty)
2 Crimp-on terminals for power & ground harness
Harness locking pin
2 Rubber grommets
Four 3/4" screws
Quickstart guide
What's in the box:
6-Channel amplifier (attached 12" power/ground/input/output harnesses)
7" Power & ground harness
Three 7" Speaker output harnesses
Power & ground connector (empty)
2 Crimp-on terminals for power & ground harness
Harness locking pin
2 Rubber grommets
Four 3/4" screws
Quickstart guide
T-Spec V10-AK4 4-gauge amplifier wiring kit — includes power wiring and 2-channel patch cable
Power up to specification
This V10-AK4 amplifier power wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 4-gauge power and ground wires, an 18-gauge turn-on lead, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.
Oxygen-free virgin copper
Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with a 125-amp fuse included) inline on the power wire, for your safety and peace of mind.
Note: This wiring kit does not include speaker wire. You'll need to purchase that separately, in order to complete your amplifier installation.
Product highlights:
4-gauge amplifier wiring kit
17 feet of 4-gauge matte pearl power cable with ring terminal
3 feet of 4-gauge matte gray ground wire with ring terminal
17-foot 2-channel RCA patch cable (double twisted pair for superior noise reduction)
17 feet of 18-gauge blue turn-on lead wire
brass mini-ANL fuse holder with 125-amp fuse installed on power wire
all wires made of oxygen-free non-recycled copper
wires meet all ANSI and CEA standards
comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
warranty: 1 year
What's in the box:
17' Length of 4 AWG OFC multi-strand power wire (ring terminal installed) w/ inline mini-ANL fuse holder and 125A mini-ANL fuse installed
3' Length of 4 AWG OFC mulit-strand ground wire w/ ring terminal
17' Length of blue 18 AWG remote turn-on wire
17' Stereo RCA patch cable
Two 4 AWG Crimp-on spade terminals
2 Spade terminal boots (white & black)
One 18 AWG crimp-on spade terminal
One 18 AWG crimp connector (red)
4 AWG firewall bushing
Eight 4" wire ties
Built tough and made specifically for Wrangler, this amplifier mounting bracket makes it easy to mount select Audio Control*, Phoenix Gold, Stinger, or can be customized for most aftermarket amplifiers under the seat in your Wrangle.
*AMPLIFIER SHOWN, NOT INCLUDED. Features
Fits 2007-2018 Wrangler JK Unlimited (4-door)
Made with 16-gauge corrosion-resistant steel with a corrosion-resistant powder coating to withstand harsh elements and prevent rusting
Pre Drilled and threaded amplifier mounting holes with supplied hardware simplify amplifier installation for select Audio Control, Phoenix Gold, or Stinger amplifiers
Can be custom drilled to universally mount other amplifiers or accessories under the seat
Uses the rear legs of the seat to secure the bracket into position
Also available for passenger side (JKUAMPBRKTP)
Lifetime Warranty
Compatible Amplifiers
Phoenix Gold GX1200.6
Stinger SPX700X4
Phoenix Gold MX Series
Stinger SPX1000X5
Stinger SPX350X2
Phoenix Gold Z 8”
Active Bass Enclosure*
Phoenix Gold GX800.4, GX1200.1
AudioControl ACX-300.4
AudioControl ACX-600.1
T-Spec V10-AK4
4-gauge amplifier wiring kit — includes power wiring and 2-channel patch cable
Power up to specification
This V10-AK4 amplifier power wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 4-gauge power and ground wires, an 18-gauge turn-on lead, a 17-foot stereo patch cable, a fuse holder, and an assortment of hardware useful for your installation. T-Spec makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.
Oxygen-free virgin copper
Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with a 125-amp fuse included) inline on the power wire, for your safety and peace of mind.
Note: This wiring kit does not include speaker wire. You'll need to purchase that separately, in order to complete your amplifier installation.
Product highlights:
4-gauge amplifier wiring kit
17 feet of 4-gauge matte pearl power cable with ring terminal
3 feet of 4-gauge matte gray ground wire with ring terminal
17-foot 2-channel RCA patch cable (double twisted pair for superior noise reduction)
17 feet of 18-gauge blue turn-on lead wire
brass mini-ANL fuse holder with 125-amp fuse installed on power wire
all wires made of oxygen-free non-recycled copper
wires meet all ANSI and CEA standards
comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
warranty: 1 year
What's in the box:
17' Length of 4 AWG OFC multi-strand power wire (ring terminal installed) w/ inline mini-ANL fuse holder and 125A mini-ANL fuse installed
3' Length of 4 AWG OFC mulit-strand ground wire w/ ring terminal
17' Length of blue 18 AWG remote turn-on wire
17' Stereo RCA patch cable
Two 4 AWG Crimp-on spade terminals
2 Spade terminal boots (white & black)
One 18 AWG crimp-on spade terminal
One 18 AWG crimp connector (red)
4 AWG firewall bushing
Eight 4" wire ties
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Thanks for subscribing!
This email has been registered!
Product | SKU | Description | Collection | Availability | Product Type | Other Details |
---|