Plug N Play Remote Start System for 2007-2009 Suzuki XL-7 Std. Key Automatic
Plug N Play Remote Start System for 2007-2009 Suzuki XL-7 Std. Key Automatic
Installation Service is available to our Local Customers in Delaware & surrounding areas! Please give us a call at 302-832-2868
Installation Service is available to our Local Customers in Delaware & surrounding areas! Please give us a call at 302-832-2868
$149.95
Availability:
In stock
SKU
FLRSGM10-2007-2009-Suzuki-XL-7-Std-Key-Automatic
Plug N Play Remote Start System for 2007-2009 Suzuki XL-7 Std. Key Automatic
Web-programmable, standalone remote start solution for GM 'SWC' full-size models 2006 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately.
*Flashlogic Updater cable and Weblink account required for firmware programming.
PLEASE NOTE:
THIS UNIT MUST BE PROGRAMMED (FLASHED) IN ORDER TO FUNCTION WITH YOUR SPECIFIC VEHICLE.
Please contact us if you would like us to provide you with the appropriate INSTALLATION GUIDE.
We can eliminate the hassle of programming your remote start, as we provide free flashing after the purchase of each unit! To save yourself the trouble, please contact us by sending us the following vehicle specifics to our email.
FOR EXAMPLE
Vehicle Year: 2014
Vehicle Make: Honda
Vehicle Model: Civic
Engine Type: 4 Cylinder / 6 Cylinder / 8 Cylinder
Ignition Type: Push-to-Start / Standard Key Start
Key Fob: Factory / Aftermarket
PLEASE NOTE that SOME vehicles require a mandatory KLON flashing in order for it to operate with this remote start. Part of the installation process includes steps that will require not only the remote start, but your vehicle and key fob, which we do not have access to. You will be responsible for completing this step. An ADS-USB Weblink Updater Flash Loader USB Cable will be required for vehicles that require KLON. We will notify you via email if your vehicle falls within this category.
HOW THE KLON PROCESS WORKS:
1. We already pre-programmed your unit to your vehicle.
2. During the installation process (as per your installation guide) you will have to connect the unit to your PC via the ADS-USB Cable (sold separately).
3. Once connected you will visit idatalink.com using the Internet Explorer browser.
4. You create a free account.
5. You will be prompted to install a small extension.
6. Once you install the extension and refresh the page, the website will detect your unit and may ask you for your vehicle information to complete the programming process and install the correct firmware on to your unit.
PLEASE ALSO NOTE that SOME vehicles require an RF KIT.
Web-programmable, standalone remote start solution for GM 'SWC' full-size models 2006 and up. Supports remote start from factory transmitter by pressing 3 X LOCK. Includes custom t-harness for ‘plug & play’ installation. Can be paired with compatible range extender kit sold separately.
*Flashlogic Updater cable and Weblink account required for firmware programming.
PLEASE NOTE:
THIS UNIT MUST BE PROGRAMMED (FLASHED) IN ORDER TO FUNCTION WITH YOUR SPECIFIC VEHICLE.
Please contact us if you would like us to provide you with the appropriate INSTALLATION GUIDE.
We can eliminate the hassle of programming your remote start, as we provide free flashing after the purchase of each unit! To save yourself the trouble, please contact us by sending us the following vehicle specifics to our email.
FOR EXAMPLE
Vehicle Year: 2014
Vehicle Make: Honda
Vehicle Model: Civic
Engine Type: 4 Cylinder / 6 Cylinder / 8 Cylinder
Ignition Type: Push-to-Start / Standard Key Start
Key Fob: Factory / Aftermarket
PLEASE NOTE that SOME vehicles require a mandatory KLON flashing in order for it to operate with this remote start. Part of the installation process includes steps that will require not only the remote start, but your vehicle and key fob, which we do not have access to. You will be responsible for completing this step. An ADS-USB Weblink Updater Flash Loader USB Cable will be required for vehicles that require KLON. We will notify you via email if your vehicle falls within this category.
HOW THE KLON PROCESS WORKS:
1. We already pre-programmed your unit to your vehicle.
2. During the installation process (as per your installation guide) you will have to connect the unit to your PC via the ADS-USB Cable (sold separately).
3. Once connected you will visit idatalink.com using the Internet Explorer browser.
4. You create a free account.
5. You will be prompted to install a small extension.
6. Once you install the extension and refresh the page, the website will detect your unit and may ask you for your vehicle information to complete the programming process and install the correct firmware on to your unit.
PLEASE ALSO NOTE that SOME vehicles require an RF KIT.
Brands | Flashlogic |
---|---|
Color | Black |
Type | DIY PLUG-N-PLAY |
Features | Standard |
Write Your Own Review