Alpine PDR-V75 5-channel car amplifier& Alpine S-S69C S-Series 6

Alpine PDR-V75 5-channel car amplifier& Alpine S-S69C S-Series 6"x9" & Alpine R-W10D4 R-Series 10" & Alpine S-S65C S-Series 6-1/2& Atrend 10SVN "10" Enclosure & Ballistic SSSK Speaker Kit (Bundle Package)

Be the First to Know

Sign up for newsletter today.

Alpine R-A60F R-Series 4-channel car amplifier & Alpine S-S69C S-Series 6

Alpine R-A60F R-Series 4-channel car amplifier & Alpine S-S69C S-Series 6"x9" component speaker system & Alpine S-S65C S-Series 6-1/2" component speaker system & SSSK speaker kit & R2AK4 amp kit (Bundle Package)

Alpine X-A90V X-Series 5-channel car amplifier & Alpine S-W10D2 S-Series 10

Alpine X-A90V X-Series 5-channel car amplifier & Alpine S-W10D2 S-Series 10" subwoofer & Alpine S-S69 S-Series 6"x9"& Alpine S-S65 S-Series 6-1/2" 2-way car speakers & Ballistic SSSK speaker kit & Atrend 10SVN Subwoofer Enclosure (Bundle Package)

Alpine PDR-V75 5-channel car amplifier& Alpine S-S69C S-Series 6"x9" & Alpine R-W10D4 R-Series 10" & Alpine S-S65C S-Series 6-1/2& Atrend 10SVN "10" Enclosure & Ballistic SSSK Speaker Kit (Bundle Package)

This bundle includes:

Alpine PDR-V75 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 350 watts RMS x 1 at 2 ohms

Alpine S-S69C S-Series 6"x9" component speaker system

Alpine S-S65C S-Series 6-1/2" component speaker system

Alpine R-W10D4 R-Series 10" subwoofer with dual 4-ohm voice coils

Atrend 10SVN 10 Single Vented Alpine Specific Enclosure

SSSK SPEAKER KIT – Ballistic Series


$1,008.00
In stock
SKU
PDR-V75-S-S69C-R-W10D4- S-S65C-10SVN-SSSK

Alpine PDR-V75 5-channel car amplifier — 75 watts RMS x 4 at 4 ohms + 350 watts RMS x 1 at 2 ohms

Concentrated power for a full system
Alpine managed to pack more power per square inch into their PDR-V75 5-channel Power Density Reference amplifier than almost any other amp in its class. The PDR-V75 can put out 75 watts RMS per channel to your four full-range speakers, plus up to 350 watts RMS to a subwoofer, and it'll fit into many of the tight spaces you find in many cars and trucks these days. You can also use this versatile amp in 3-channel mode, driving a pair of high-performance speakers with 200 watts each, while still sending 350 watts RMS to a sub.

Tone control
Alpine included the tone controls you'll need to tune your system so your speakers and sub sound their best. You can use the high-pass filters to remove the extreme low bass from your full-range speakers, so they'll play more efficiently. You can adjust the subwoofer channel's low-pass filter, subsonic filter, and bass boost to get just the right bass tone, and you can add the optional RUX-KNOB.2 remote bass knob to control your bass from the dash.

Superior sound and build quality
Alpine PDR-V75
Alpine built the PDR-V75 to exacting physical and electronic standards, resulting in a tough, powerful amp with an incredibly clean and noise-free output. All the electrical connections are located on one side, for more convenient and neat installations. Speaker-level inputs allow you to use this amp in almost any system, even one with a factory radio. And you can rotate the badge, so the Alpine logo can always display right side up, no matter which way you mount your PDR-V75.

Product highlights:
5-channel car amplifier
75 watts RMS x 4 + 250 watts RMS x 1 at 4 ohms
100 watts RMS x 4 + 350 watts RMS x 1 at 2 ohms
200 watts RMS x 2 bridged at 4 ohms + 350 watts RMS x 1 at 2 ohms
CEA-2006 compliant
variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel
variable subsonic filter (8-40 Hz, 24 dB/oct) on sub channel
variable bass boost (0-12 dB at 50 Hz) on sub channel
More Features
optional RUX-KNOB.2 wired remote level control for sub channel
preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input)
Class-D amplifier design
MOSFET power and output stages
fuse rating: 40A x 2
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
10-5/8"W x 2"H x 6-9/16"D
warranty: 1 year
Our 60-day money-back guarantee
MFR # PDR-V75
What's in the box:
Alpine PDR-V75 owner's manual

5-Channel Class-D amplifier
Two 40-amp ATO fuses (installed)
Four 3/4" Self-tapping screws
3mm Allen wrench
2mm Allen wrench
Self-adhesive Alpine logo plate
Owner's manual (Eng/Fren/Span)
Verification certificate
Warranty information
On-line registration information

Alpine S-S69C S-Series 6"x9" component speaker system

Refresh your ride with Alpine
Alpine's been building quality car speakers for decades, and their latest S-Series S-S69C 6"x9" component speaker system is no exception. If you've been living with anemic factory sound, this step up in range, tone definition, and power handling will make you giddy just about every time you hop behind the wheel. And if you're really jonesing for the best possible sound quality, hook these speakers up to a nice amp — you won't regret it!

Worthy materials
Alpine's carbon fiber-reinforced plastic woofer cones provide next-level sturdiness but are also agile enough to handle the complexities of the midrange. The big multi-roll rubber surround contributes to reduced distortion for a cleaner sound. Separate silk dome tweeters provide all the precise details that bring out the character of the instruments and vocals. If you've never experienced Alpine sound quality, these speakers are a great place to start.

Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations.

Product highlights:
component speaker system includes 2 woofers and 2 tweeters
6"x9" carbon fiber-reinforced plastic woofer cone with specialized rubber surround
1" silk dome tweeter with inline crossover
handles up to 85 watts RMS (260 watts peak power)
frequency response: 65-22,000 Hz
sensitivity: 90 dB
woofer top-mount depth: 2-15/16"
grilles not included
warranty: 1 year
Our 60-day money-back guarantee
MFR # S-S69C
What's in the box:
Alpine S-S69C owner's manual

2 Woofers
2 Bottom mount brackets
2 Tweeters (each has a 29" length of wire attached)
2 Flush mount housings (with tweeters installed)
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-3/16" Screws
Eight M4x60mm Machine screws (each screw has a lock washer attached)
Eight M4 Nuts
8 Speed clips
16 Flat washers
8 Split lock washers
8 Spacers
Warranty information
On-line product registration information
Important Notice sheet
Template and specs on box

Alpine S-S65C S-Series 6-1/2" component speaker system

Refresh your ride with Alpine
Alpine's been building quality car speakers for decades, and their latest S-Series S-S65C 6-1/2" component speaker system is no exception. If you've been living with anemic factory sound, this step up in range, tone definition, and power handling will make you giddy just about every time you hop behind the wheel. And if you're really jonesing for the best possible sound quality, hook these speakers up to a nice amp — you won't regret it!

Worthy materials
Alpine's carbon fiber-reinforced plastic woofer cones provide next-level sturdiness but are also agile enough to handle the complexities of the midrange. The big multi-roll rubber surround contributes to reduced distortion for a cleaner sound. Separate silk dome tweeters provide all the precise details that bring out the character of the instruments and vocals. If you've never experienced Alpine sound quality, these speakers are a great place to start.

Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations.

Product highlights:
component speaker system includes 2 woofers and 2 tweeters
6-1/2" carbon fiber-reinforced plastic woofer cone with specialized rubber surround
1" silk dome tweeter with inline crossover
handles up to 80 watts RMS (240 watts peak power)
frequency response: 70-22,000 Hz
sensitivity: 88 dB
woofer mounting depth: 2-5/16
grilles not included
warranty: 1 year
Our 60-day money-back guarantee
MFR # S-S65C
What's in the box:
Alpine S-S65C owner's manual

2 Woofers
2 Woofer mount adapter brackets
2 Tweeters (each has a 29" length of wire attached)
2 Flush mount housings (with tweeters installed)
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-3/16" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
On-line product registration information
Important Notice sheet
Template and specs on box

Alpine R-W10D4 R-Series 10" subwoofer with dual 4-ohm voice coils

Maximum bass output
For those who like it loud, Alpine salutes you! Their legendary R-Series subwoofers are made to bring powerful bass to just about any vehicle. The R-W10D4 10" sub features a cone made from Kevlar® treated pulp — the same material used to make bulletproof vests — while its durable Santoprene™ surround allows for huge amounts of excursion. Alpine built this sub for bassheads who want the best of both worlds: accurate response and otherworldly thump.

Bring on the power
The R-W10D4 can handle up to 750 watts RMS, so be sure to choose a suitable amplifier as these bass monsters definitely want lots of power. Its dual oversized 4-ohm voice coils offer wiring flexibility you'll appreciate as your system changes and grows, so you can always pull maximum power from your amp. It works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.

To drive this single subwoofer, we recommend a mono amplifier rated between 560 and 1125 watts RMS at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

Product highlights:
10" subwoofer with dual 4-ohm voice coils
Kevlar reinforced pulp cone with HAMR Santoprene rubber surround
frequency response: 26-200 Hz
power handling: 750 watts RMS (375 watts per coil)
peak power: 2250 watts
top-mount depth: 5-7/8"
grille not included
warranty: 1 year
Our 60-day money-back guarantee
MFR # R-W10D4
What's in the box:
Alpine R-W10D4 owner's manual

One 10" Dual 4-ohm voice coil subwoofer
1 Rubber concealing ring (installed)
Two 3" jumper cables (each has a single banana connector on each end)
R-Series Subwoofer Application Guide (English/ French)
On-line product registration information (English/ French/ Spanish)
Warranty information (English/ French)
Important Notice! (English/ French)

Atrend 10SVN 10 Single Vented Alpine Specific Enclosure

Alpine specific enclosures are a perfect match for your woofer. Our sub box was designed with the help of Alpine and is approved by them to withhold the subwoofer box requirements in place by Alpine.
Alpine-10" Single Slot Vented
Speaker Box-Subwoofer Specific-Alpine

SSSK SPEAKER KIT – Ballistic Series

2 Pieces 10in x 10in Material(254mm x 254mm)
COVERAGE – 0.69 Sq Ft (0.03M2) Each – 1.38 Sq Ft (0.13M2) Total
BOX DIMENSIONS – 10.37in x 11.in x 0.5in
MASTER CARTON – 40 Per Carton – 22.83in x 11.61in x 12.2in
New Jet Black Finish with Silver Logo
2.2mm Thickness
0.72 mass per ft2



More Information
UPC Code: 612508144584
MPN Code: PDR-V75-S-S69C-R-W10D4- S-S65C-10SVN-SSSK
Brands Alpine
Color Black
Number of Channels 5-Channel
Amplifier Class AB
Type 5-Channel
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account