PAC Audio

Facilitates replacement of a factory radio while retaining all factory safety warning chimes and audible turn signal indicators. Compatible with amplified and non-amplified audio systems. Retains all safety warning chimes Provides 10-minute RAP accessory output Compatible with all audio system levels Amplifier turn-on output...

The AVS-21 module features two sets of AV (left/right audio and video) inputs and one AV output for switching between two AV sources. The unit provides a trigger wire that can be set up to receive a positive or negative input. The AVS-21 is...

PAC AmpPRO AP4-FD11 Aftermarket Amplifier Interface Allows seamless addition of an amplifier in select 2007-14 Ford-built vehicles with Sony     Your amp will sound better than the factory system You can make your Ford's less-than-ideal factory system actually sound premium by upgrading the...

The CAM-TY11 is a reverse camera T-harness that gives the ability to add a reverse camera input for Toyota and select Scion and Subaru 6.1 touchscreen radios. The harness is Plug-and-Play with no need to connect to reverse lamps for reverse trigger. More Information...

Provides an audio/video signal output from a factory radio to an aftermarket monitor. Also for use with a C2R-CHY4 interface to replace a factory radio and retain the factory VES monitor and IR system. Provides an audio/video output from the factory radio Routes audio...

PAC GMRVD Rear Seat Entertainment Cable Retain the factory rear seat DVD system or add monitors to the factory entertainment system in select 2007-up General Motors vehicles   This PAC GMRVD adapter lets you continue to use the factory-installed rear-seat LCD screen in select...

PAC GMRVD2 Rear Video Retention Cable Retain the GM Rear Seat Entertainment system when you install a new car stereo in select 2012-14 General Motors vehicles     Keep your rear seat entertainment system This GMRVD2 adapter cable from PAC lets you continue to...

Listen to your iPod or iPhone and keep it charged using your Chrysler, Dodge, or Jeep factory stereo. Just connect this interface to the back of your factory stereo via the included cable, then plug in your iPod/iPhone and go. The interface lets you...

Texting and driving is downright dangerous. Driving requires focus, concentration, and full awareness. But sometimes, you need to take an urgent call that just cant wait. Prevent the dangers of using your phone on the go with TranzIt BLU HF. Engineered to work with...

Single Stereo Gain controls Ultra compact housings - achieved by recessing transformers into circuit board High Power - conservatively rated @ 55watts per channel Full 20Hz to 20kHz frequency response (+/- 1.5 dB) Single harness design Wire-tie or screw mounting provisions More Information MPN...

Built in remote turn-on circuit Includes remote level controller Accepts both high level and low level input Single Stereo Gain controls Ultra compact housings - achieved by recessing transformers into circuit board High Power - conservatively rated @ 55watts per channel Full 20Hz to...

Retains the function of OnStar and Bose amplified audio system when the factory radio is replaced. Generates all safety warning chimes. Retains OnStar when the factory radio is replaced Retains all safety warning chimes Retains Bose amplified audio system Plug-in installation for vehicles with...

Retains OnStar system functionality and the Bose factory-installed amplifier (if present) when the factory radio is replaced in a 29-bit GMLAN vehicle. Generates all safety warning chimes and audible turn signal indicators. Retains OnStar when the factory radio is replaced Retains Factory Bluetooth (2009+...

The SWI-CP5 interface allows the retention of steering wheel controls (SWC), rear seat controls (RSC) and retained accessory power (RAP) whenever replacing a factory radio. Use of this interface also allows you to program two radio functions to each SWC button by using short...

6 foot Dash Mount USB Adaptor More Information MPN Code: USBDMA6 Brands PAC Audio Color Black